Steelmaking, continuous billet casting, hot rolling and reinforcement welding form the manufacturing base behind Sino Steel's long-product supply. Production and inspection are coordinated around the grade, dimensions and delivery requirements of each order.
Continuous casting supplies billets for rolling. Straight reinforcing bars and coiled wire rod then follow different mill and finishing routes. Prepared reinforcement wire moves through a separate resistance-welding operation to produce welded mesh.
Grade-specific steel chemistry, casting, billet identification and transfer to rolling.
Steelmaking begins with the specified chemistry for the ordered grade. Furnace and ladle operations prepare the melt for casting, while billet identification and transfer records carry material identity into the rolling schedule.
In continuous casting, molten steel forms solid billet strands that are cut into lengths suitable for subsequent hot rolling.
Billets pass through reheating and successive roughing, intermediate and finishing stands. Roll passes progressively reduce the section and form the required deformations on the finished reinforcing bar.
After rolling, the bars move to a cooling bed. Cold shearing, counting and bundling prepare straight-length rebar for dimensional inspection and batch release.
Wire rod production uses rolling stands and a high-speed finishing section to achieve the required round section. Downstream guides, a laying head and a controlled cooling conveyor form and cool successive rings before coil collection.
At the finishing area, coils are reformed, compacted and tied for identification and handling. Grade, surface condition, diameter and coil presentation are confirmed against the agreed supply specification.
Prepared longitudinal and transverse reinforcement wires enter the mesh line through straightening, feeding and positioning equipment. Resistance-welding electrodes join the intersections at the specified wire spacing.
Finished mesh advances to cutting and stacking stations for sheet orders. Suitable wire sizes and mesh designs can be prepared for roll supply using the corresponding winding and handling equipment.
Mill inspection follows the material from steel grade control through finished size, surface condition and mechanical testing. Rebar, wire rod and welded mesh each have inspection points suited to their product form and specification.
MTC documentation can accompany agreed orders. Customer inspection and third-party review by SGS, BV or TÜV may be arranged to the purchase requirements.
Straight rebar bundles, wire rod coils and welded mesh are managed as separate handling units after production. Each lot is matched with its product specification, inspection basis and shipment requirements.
Stock planning and packing schedules support distributor replenishment and project deliveries. Cutting and bending services can also be coordinated for approved reinforcement schedules.
Send your product, standard, grade, dimensions and quantity. Our sales team will review production and stock options for your order.
Standard MOQ: 25 MT · Bulk orders of 500 MT and above
Share your specifications and attach a material list or drawing if available.